福州大学机械工程学院教师钟舜聪

教师名录 – 钟舜聪
福州大学机械工程学院教师钟舜聪
钟舜聪
性 别 男
出生年月 1976年4月
系 别 机电工程系
学 位 博士
职 称 研究员/博士生导师
详细资料

 联系方式

通讯地址:中国福建省福州市福州地区大学新区学园路2号  邮编:350116

 E-mail:sczhong@fzu.edu.cn    

主要学历及工作经历

2010年6月至今: 

福州大学机械工程及自动化学院,研究员/博士生导师/学术委员会委员

福建省引进高层次创业创新人才(福建省“百人计划”)

福建省杰出青年基金获得者

福建省医疗器械行业技术开发基地主任

福州大学重点学科“仪器科学与技术”学科带头人

福州大学应用光学和太赫兹及无损检测实验室负责人及团队负责人

福建省高端装备制造协同创新中心“机械零部件与结构的失效和安全服役”PI 团队负责人(福建省“2011计划”)

 2013年9月至今:

 华东理工大学中航商用发动机寿命预测技术联合创新中心,客座研究员

 2010年6月至今:

 华东理工大学承压系统与安全教育部重点实验室,客座研究员

 2014年1月至2015年07月:

 英国斯特拉斯克莱德大学海洋工程系,博士后/Chancellor  Fellow/Lecturer

2008年10月至2010年06月:

英国利物浦大学电气电子工程系,博士后副研究员

2008年01月至2008年10月:

上海交通大学机械与动力工程学院,讲师

2007年08月至2007年12月:

英国帝国理工机械工程系,博士后副研究员

2007年06月至2007年08月:

英国兰卡斯特大学微系统研究中心,博士后副研究员

2004年10月至2007年06月:

英国曼彻斯特大学机械航空及土木系,博士研究生(曼彻斯特大学海外学生全额奖学金)

2004年01月至2004年10月: 

香港理工大学应用物理系,助理研究员

2002年01月至2004年01月:

深圳迈瑞生物医疗电子超声部研发部,嵌入式系统研发工程师

1999年09月至2002年01月:

汕头大学机械电子工程系,硕士研究生(广东省“南粤优秀研究生”、优秀毕业研究生,全系第一)

1995年09月至2002年07月:

汕头大学机械电子工程系,本科生(优秀本科毕业生,全系第一,学生会副主席)

主要学术及社会兼职

国际标准ISO 16063-33“磁灵敏度测试”起草小组成员

Journal of Marine Science Research and Technology, Editorial Board Member

Institute of Electrical and Electronics Engineers (IEEE), Member

American Society of Mechanical Engineers   (ASME), Member

Optical Society of America (OSA), Member

中国机械工程师学会,高级会员

中国仪器仪表学会,高级会员

国家自然基金评审专家、教育部回国留学人员启动资金、福建省自然科学奖、厦门市双百人才评审专家、莆田市双百人才评审专家、国际杂志特邀审稿人:Optics Letters, Optics Express, Journal of Sound and Vibration,   IEEE Photonics Journal等A*杂志

 研究领域(研究课题)

1) Terahertz Pulsed Imaging, High Power Terahertz Device based on Surface Plasmon Resonance, ultra-sensitive terahertz sensing, and Terahertz applications 

2)Optical Coherence Tomography and its applications

3) Non-destructive testing and quantitative evaluation,damage/defect detection and health monitoring/condition monitoring, characterization of multi-layered coating structures / thin films/surfaces and interfaces (optical coherence tomography,terahertz pulsed imaging, ultrasonic imaging, infrared   spectroscopy and imaging, thermal imaging, ultrasonic wave propagation,vibration, and acoustic emission etc.

4) Wearable medical devices and biomedical sensing

5)Advanced signal/imaging processing, sensors, instrumentations and algorithm development

6)Design, analysis and health monitoring of offshore wind turbines

7)FDTD electromagnetic simulation, and finite element analysis 8)Active vibration control/isolation

承担科研课题情况

在研项目:

1)   教育部高等学校博士学科点科研基金(博导类),主持,“高功率太赫兹脉冲成像系统及玻璃纤维复合材料的缺陷检测和评价研究”,2013-2016

2)   卫生和计划生育委员会科研基金,主持,“高分辨率眼科光学相干层析成像仪的研发”,2013-2016

3)   福建省杰出青年基金(滚动资助计划),主持,“复合材料的定量无损评价研究”,2014-2017

4)   厦门特种设备检验院项目,主持,基于超声红外热像法的奥氏体不锈钢焊缝缺陷检测技术,2015-2016结题项目

5)   国家自然科学基金,主持, “多层结构蠕变和微裂纹扩展行为的无损检测和定量评价”, 2011-13,结题

6)   福建省杰出青年基金,主持,“基于光学相干层析和太赫兹成像的飞机复合材料的无损检测和定量评价”,2011-2014,结题

7)   厦门特种设备检验院项目,主持,“聚乙烯管道接头的超声相控阵检测与缺陷智能化识别研究”,2013-2014,结题

8)   厦门特种设备检验院项目,主持,“基于红外热成像的聚乙烯管道接头缺陷检测及图像处理技术研究”,2013-2014,结题

9)   教育部回国留学人员启动基金,主持,“结构故障诊断和信号处理研究”,2010–2012,结题

10)  承压系统与安全教育部重点实验室开放基金,主持,“膜基结构的无损检测及定量评价”,2011-13,结题

11)  福州大学科研启动基金,主持,“光学相干层析无损检测系统及其应用研究”,2011-2013,结题

12)  企业横向项目,技术主持,“硫化机的测试分析和故障诊断”,2013-2013,结题

13)  福建省特种设备检验院项目,主持,“基于光学相干层析的无损检测系统在承压设备中的研究与应用”,2010-2012,结题

14)  科技部重大仪器设备专项项目,主要参与,“高精度衡器载荷测量仪开发和应用”,2011-2016

15)  国家自然科学基金,主要参与,“材料蠕变损伤和微组织演化的非线性超声兰姆波评价”,2011-13,结题

16)  福建省特种设备检验院,主要参与,“港口起重设备动态参数检测与评价研究”09-11,结题

17)  福建省特种设备检验院,主要参与,“远场涡流检测技术研究与应用”2009-2011,结题

18)   国家质检总局院科技计划项目,主要参与,“在役锅炉水冷壁管涡流检测技术研究与应用”2009-2011,结题

19)  英国政府科技战略委员会(TSB)项目,主要参与,“利用太赫兹和红外相干层析实时在线监测和控制生物制药的生产过程”,结题

20)  英国工业项目,主要参与,“基于超声导波在航空电力系统无损检测”,结题

21)  英国工程和自然科学研究委员会(EPSRC)课题,主要参与,“无损检测的可靠性”,结题

22)   英国曼彻斯特大学研究项目,主持,“结构损伤检测以及信号处理方法研究”,结题

23)   香港创新科技基金(ITF)项目,主要参与,“汽车防盗系统”,结题

24)   香港创新科技基金(ITF)项目,主要参与,“精密仪器的主动振动隔离/控制”,结题

25)   东芝ODM项目,主要参与,“全数字黑白B超医学诊断仪”,结题

26)   教育部高等学校骨干教师资助计划项目,主要参与,“机械振动信号处理中一些关键理论的研究”,结题

27)   国家自然科学基金,主要参与,“机械振动信号处理中的离散频谱校正理论”,结题

出版著作和论文

至今发表文章110余篇(其中SCI/EI 百余篇次),论文被引用700余次,最高单篇文章引用率近百次(外文引用),申请国家发明专利17项(已授权7项)、2项PCT国际专利,另授权实用新型专利3项。

主要代表作:

1)Jianfeng Zhong, Shuncong Zhong*, Qiukun Zhang, Two-dimensional   optical coherence vibration tomography for low-frequency vibration   measurement and response-only modal analysis, Mechanical Systems and Signal   Processing, 2016 (accepted)

2)Wanli Tu, Shuncong Zhong*, Yaochun Shen1, and Atilla Incecik, Nondestructive   Testing of Marine Protective Coatings Using Terahertz Waves with Stationary   Wavelet Transform, Ocean Engineering, 111, 582-592, 2016

3)Haizi Yao, Shuncong Zhong*, Wideband circularly polarized vortex   surface modes on helically grooved metal wires, IEEE Photonics Journal, 7   (6), 1-7, 2015

4)Shuncong Zhong*, Qiukun Zhang,   Subnanoscale-displacement-resolution Calibration of Piezoelectric Actuators   using Enhanced Optical Coherence Tomography, Sensors and Actuators A:   physical, 233, 42-46, 2015

5)H Yao, Shuncong Zhong*, W Tu,Performance   analysis of higher mode spoof surface plasmon polariton for terahertz sensing, Journal of Applied Physics   117 (13), 133104, 2015

6)Jianfeng Zhong, Shuncong Zhong*, Qiukun Zhang, “Two-dimensional optical   coherence tomography for real-time structural dynamical characterization”,   Optics and Lasers in Engineering, 66, 74-79, 2015

7)H. Lin, R. May, M. Evans, Shuncong Zhong, L. Gladden, Y. Shen,   J. Zeitler, Impact of Processing Conditions on Inter-tablet Coating Thickness   Variations Measured by Terahertz In-Line Sensing, Journal of Pharmaceutical   Sciences, 104(8), 2513-22 , 2015

8)Qiukun Zhang, Shuncong Zhong, Jianfeng Zhong, Sine-modulated Wavelength-independent   Full Range Complex Spectral Optical Coherence Tomography with an Ultra-broadband   Light Source, Advances in Mechanical Engineering (accepted, 2015)

9)Li Cao, Shuncong Zhong*, Qiukun Zhang and Xinbin Fu, Surface   Micro Defect Detection of Tapered Rollers Based on Laser Diffraction, International   Journal of Sensor Networks and Data Communications, 2015 (accepted)

10)Haizi Yao, Shuncong Zhong*, Higher-order mode spoof SPP of periodic   grooves for high sensitive terahertz sensing, Optics Express, 2014, 22(21):   25149-25160.

11)Wanli Tu, Shuncong Zhong*, Yaochun Shen, Qing Zhou and Ligang   Yao, “FDTD-Based Quantitative Analysis of Terahertz Wave Detection for   Multilayered Structures”, Journal of the Optical Society of America A , 31(10),   2285-2293 (2014)

12)Haizi Yao, Shuncong Zhong*, “Plasmonic   corrugated cylinder-cone terahertz probe”, Journal of the Optical Society of   America A, 31(8), 1856-1860, 2014

13)Haizi Yao, Shuncong Zhong*, “Frequency dependent   circular-polarization of terahertz chiral spoof surface plasmon polariton on   helically grooved metallic wire”, Optics Communications, 2015

14)Jinquan Guo1, Lianping Wu1, Xiaoxiang Yang, Shuncong Zhong*,   Elastic-plastic Endochronic Constitutive Model of 0Crl7Ni4Cu4Nb Stainless   Steels, Mathematical Problems in Engineering, 2016 (accepted)

15)Shuncong Zhong, Y.Shen, L. Ho, R. May, J. Zeitler, M. Evans, P.   Taday, M. Pepper, T. Rades, K. Gordon, R. Muller, and P. Kleinebudde,   “Nondestructive quantification of pharmaceutical tablet coatings using   terahertz pulsed imaging and optical coherence tomography”, Optics and Lasers   in Engineering, 49(3), 361-365, 2011.

16)Shuncong Zhong, Hao Shen, and Yaochun Shen, “Real-time   monitoring of structural vibration using spectral-domain optical coherence   tomography”, Optics and Lasers in Engineering, 49(1), 127-131, 2011.

17)Shuncong Zhong, S Olutunde Oyadiji, “Crack sensitivity analysis   of sampling interval for damage detection by wavelet transform”, Structural   Control and Health Monitoring, 20(1), 2013

18)Shuncong Zhong, S. O. Oyadiji, “Detection of cracks in   simply-supported beams by continuous wavelet transform of reconstructed modal   data”, Computers and Structures, 89,127-148, 2011.

19)Shuncong Zhong, S. O. Oyadiji, “Crack Detection in Simply   Supported Beams using Stationary Wavelet Transform of Modal Data”, Structural   Control and Health Monitoring, 18(2), 169-190, 2011.

20)Shuncong Zhong, Y. Shen, H. Shen, and Y. Huang, “FDTD study of a   novel terahertz emitter with electrical field enhancement using surface   Plasmon resonance”, PIERS Online, 6(2), 153-156, 2010

21)May RK, Evans MJ, Shuncong Zhong, Warr I, Gladden LF, Shen YC,   Zeitler JA Terahertz in-line sensor for perforated pan film coaters. Journal   of Pharmacy and Pharmacology, 62(10), 1213-1214, 2010

22)Shuncong Zhong, S Olutunde Oyadiji, “Analytical predictions of   natural frequencies of cracked beams with a traversing auxiliary mass”,   Journal of Sound and vibration , 311, 328-352, 2008

23)Shuncong Zhong, S Olutunde Oyadiji, “ Response-only method for   damage detection of beam-like structures using high accuracy frequencies”,   Journal of Sound and Vibration , 311, 1075-1099, 2008

24)Shuncong Zhong, S Olutunde Oyadiji, “Identification of cracks in   beams with auxiliary mass spatial probing by stationary wavelet transform”,   Trans. of ASME, Journal of Vibration and Acoustics , 30, 1-14, 2008

25)Shuncong Zhong, S Olutunde Oyadiji, “Crack detection in   simply-supported beams without modal parameter using stationary wavelet   transform”, Mechanical Systems and Signal Processing , 21(4) , 1853-1884,   2007

26)R.K. May, M. J. Evans, Shuncong Zhong, I. Warr, L.F. Gladden,   Y.C. Shen and J.A. Zeitler, “Terahertz in-line sensor for direct coating   thickness measurement of individual tablets during film coating in   real-time”, Journal of Pharmaceutical Sciences, 100(4), 1535-1544, 2011

27)R.K. May, K. Su, L. Han, Shuncong Zhong, J. A. Elliott, L. F.   Gladden, M. Evans, Y. C. Shen, and J. A. Zeitler, Hardness and Density   Distributions of Pharmaceutical Tablets Measured by Terahertz Pulsed Imaging,   Journal of Pharmaceutical Sciences (DOI: 10.1002/jps.23560)

28)Yuhui Chen, Shuncong Zhong and Xiaoxiang Yang, Nonlinear   thermo-mechanical coupled modeling for the analysis of stress distribution in   air-plasma-sprayed thermal barrier coatings, Key Engineering Materials,   577-578, 2014, pp 41-44.

29)Z. Zhu, X. Qiu, Shuncong Zhong*, X. Fu, Y. Yang, Active infrared   thermography for defect detection of polyethylene pipes, Advanced Materials   Research, 1044-1045 2014: 700-703.

30)Shuncong Zhong, Qiukun Zhang, and Ligang Yao, Yaochun Shen, “Fabric   Defect Detection using Wavelet-enhanced Single-Point Photoelectric Sensing   System”, Applied Mechanics and Materials, 162, 2012, 497-504.

31)YH Chen, XX Yang, SC Zhong, Finite   Element Analysis of Four Fracture Mechanism in the Thermal Barrier Coating, Advanced Materials Research   933, 2014,187-191

32)Wanli Tu, Shuncong Zhong*, Yaochun Shen, FDTD-based Computed Terahertz

    33)Shuncong Zhong et al., Non-contact creep measurement based on   Fourier Domain Optical Coherence Tomograpy, Applied

  Mechanics and Materials   (accepted)

34)Shuncong Zhong et al., Damage detection of cantilever beams   based on derivatives of mode shapes, Applied Mechanics and Materials   (accepted)

35)Zhibin Zhu, Xu Qiu , Shuncong Zhong* et al. Active Infrared   Thermography for Defect Detection of Polyethylene Pipes, Applied Mechanics   and Materials, 2014

36)Manting Luo,Tengfei You,Qiukun Zhang,Jianfeng Zhong,Shuncong   Zhong*, Enhancement of Time-domain Optical Coherence Tomography Images Using   Stationary Wavelet Transform, Applied Mechanics and Materials (accepted)

37)Shuncong Zhong, Y. Yan, Y.C. Shen, “Non-Destructive Testing of   GFRP Materials by Fourier-Domain Infrared Optical Coherence Tomography”, The   International Conference on Automatic Control and Artificial Intelligence,   2012 (accepted)

38)Junru Li, Shuncong Zhong*, X. Yang, L. Gong, Yaochun Shen,   Jinquan Guo, Shiwang Chen, Xiaohan Chen, Tong Lin, Feifei Ye, Zhenxing Wen,   Tianxue Yang, “Finite Element Modelling and Experimental Investigation of Low   Frequency Electromagnetic Technique in Pipeline Defect Detection”, The   International Conference on Automatic Control and Artificial Intelligence,   2012 (accepted)

39)Tianxue Yang, Shuncong Zhong, Yaochun Shen, “Non-contact   Real-time Measurement of Structural Thermal Deformation in High-temperature Environment   by Optical Coherence Deformation Tomography”, The International Conference on   Automatic Control and Artificial Intelligence, 2012 (accepted).

40)Shuncong Zhong, Qiukun Zhang, and Ligang Yao, Yaochun Shen, “Fabric   Defect Detection using Wavelet-enhanced Single-Point Photoelectric Sensing   System”, The Joint International Conference of the XI International   Conference on Mechanisms and Mechanical Transimissions (MTM) and the   International Conference on Robotics (Robotics’ 12), Clermont-Ferrand, Fance,   June 6-8, 2012 (accepted).

41)Shuncong Zhong, S Olutunde Oyadiji, “Comparisons of damage   detection in simply supported beams using stationary wavelet transform on   displacement mode shapes and natural frequencies curves”, ASME International   Design Engineering Technical Conferences & Computers and Information in   Engineering Conference, August 29-31, 2011, Washington, DC, USA (accepted)

42) Robert May, Micheal   Evens, Shuncong Zhong, Ian Warr, Lynn Gladden, Yaochun Shen and Axel Zeitler,   Direct film coating thickness measurement of individual tablets in real-time   using a terahertz in-line sensor, The 1st Electronic Conference on   Pharmaceutical Sciences (ECPS), 2011

43)Shumei Chen, Chuanming Chen, and Shuncong Zhong, English-Chinese   Bilingual Lectures on Hydraulic and Pneumatic Transmission and Engineering   Education, 2011 International Conference on Engineering Education and   Management (accepted)

44)Shuncong Zhong, X. Yang, Yaochun Shen, “Optical Coherence   Tomography-based Structural Vibration Sensor System”, Proceedings of IEEE   International Conference on Measuring Technology and Mechatronics Automation,   2011

45)Shuncong Zhong, Y. Shen, R.K. May, M. Evans, J.A. Zeitler, and   D. Dey, “Neural network-based thin coating characterization by terahertz   pulsed imaging in frequency domain”, Proceedings of the IEEE International   Conference on Infrared, Millimeter, and Terahertz Waves, 2010

46)Shuncong Zhong, Y. Shen, H. Shen, R.K. May, M. Evans, J.A.   Zeitler, and I. Warr, “Near-Infrared Spectroscopy for Non-destructive coating   analysis cablibrated by terahertz pulsed imaging”, Proceedings of the IEEE   International Conference on Infrared, Millimeter, and Terahertz Waves, 2010

47)Hao Shen, N Newman, L. Gan, Shuncong Zhong, and Yaochun Shen,   “Compressed terahertz imaging system using a spin disk”, Proceedings of the IEEE   International Conference on Infrared, Millimeter, and Terahertz Waves, Rome,   Italy, September 2010

48)R.K. May, M. Evans, Shuncong Zhong, I. Warr, L.F. Gladden, Y.C.   Shen and J.A. Zeitler, “In-line monitoring of coating thickness of   pharmaceutical tablets during production scale film coating by terahertz   spectroscopy”, Proceedings of the IEEE International Conference on Infrared,   Millimeter, and Terahertz Waves 2010

49)R. K May, M. J. Evans, Shuncong Zhong, “Terahertz Pulsed Imaging   of Surface Variations on Pharmaceutical Tablets”, Proceedings of the IEEE   International Conference on Infrared, Millimeter, and Terahertz Waves 2010

50)H. Shen, N. Newmana, L.Gan, Shuncong Zhong, Y. Huang and Y. C.   Shen, Compressive Terahertz imaging system using single rotating mask, 3rd   Annual Meeting on THz measurement techniques, Institute of Physics ISAT Group   & Dielectrics Group, The University of Reading, 1st July, 2010

51)R.K. May, M. J. Evans, Shuncong Zhong, I. Warr, L. F. Gladden,   Y.Shen, J.A. Zeitler,“Terahertz in-line sensor for perforated pan film   coaters”, UK-PharmSci 2010.

52)Shuncong Zhong, S Olutunde Oyadiji, “Response-only   frequency-domain method for damage detection”, Proceedings of the ASME   International Design Engineering Technical Conferences & Computers and   Information in Engineering Conference, 2009

53)Shuncong Zhong, H. shen, Y. Shen, J.A. Zeitler, L. Ho, M. Evans,   P. T. Taday, M. Pepper, T. rades, K.C. Gordon, R. Muller and P. Kleinebudde,   “Noninvasive 3D characterization of Layered samples using Terahertz pulsed   imaging and infrared optical coherence tomography”, Proceedings of the IEEE   International Conference on Infrared, Millimeter, and Terahertz Waves, 2009

54)Shuncong Zhong, Y. shen, M. Evans, J.A. Zeitler, R.K. May, L.F.   Gladden and C. Byers, “Quantification of thin-film coating thickness of   pharmaceutical tablets using wavelet analysis of terahertz pulsed imaging   data”, Proceedings of the IEEE International Conference on Infrared,   Millimeter, and Terahertz Waves, 2009

55)R.K. May, M. Evans, Shuncong Zhong, R. Clarkson, Y. Shen, L.F.   Gladden and J.A. Zeitler, “Real-time in situ measurement of particle size in   flowing powders by terahertz time-domain spectroscopy”, Proceedings of the   IEEE International Conference on Infrared, Millimeter, and Terahertz Waves,   2009 (Invited paper)

56)R.K. May, L.Han, J. Alton, Shuncong Zhong, J.A. Elliott, C.   Byers, L.F. Gladden, M. Evans, Y. Shen, and J.A. Zeitler, “Pharamecutical   tablet hardness measurements with Terahertz pulsed imaging”, Proceedings of   the IEEE International Conference on Infrared, Millimeter, and Terahertz   Waves, 2009

57)Shuncong Zhong, H. Shen, J.A. Zeitler, R.K. May, M. Evans, P. T.   Taday, D. Dey and Y. Shen, “Non-destructive characterization of   pharmaceutical tablet coating by terahertz and infrared spectroscopy and   imaging”, 2009 AAPS Annual Meeting and Exposition, Los Angeles, USA

58)R.K. May, Shuncong Zhong, M. Evans, Y. Shen, L.F. Gladden and   J.A Zeitler, “Terahertz measurements of particle size in static/flowing   powders”, 2009 AAPS Annual Meeting and Exposition, Los Angeles, USA

59)R.K. May, L. Han, Shuncong Zhong, J. Alton, M. Evans, D. Dey, J.   Elliott, Y. Shen, L.F. Gladden and J.A. Zeitler, “Terahertz imaging of   density variations over the surface of typical pharmaceutical”,2009 AAPS   Annual Meeting and Exposition, Los Angeles, USA

60)Shuncong Zhong, S Olutunde Oyadiji, “Wavelet-based structural   damage detection”, Proceedings of ASME International Design Engineering   Technical Conferences & Computer and Information in Engineering   Conference,Vol.1,461-469,2008

61)Shuncong Zhong, S Olutunde Oyadiji, “Detection of cracks in   simply-supported beams by wavelet analysis”, Proceedings of The 11th   International Conference on Vibration Engineering, Romania, 27-30   September,2005

62)Zhong Shuncong, S Olutunde Oyadiji, “Damage Detection in Simply   Supported Beams using Derivatives of Mode Shapes”, Proceedings of 12th   International Congress on Sound and Vibration (ICSV12), 11-14, July, 2005,   Lisbon, Portugal

63)Kang Kang, Zhong Shuncong, “Research of Phase Difference   correcting Methods on Spectrum”. Proceedings of 8th International Congress on   Sound and Vibration (ICSV8). 2-6 July, 2001, Hong Kong: 2391-2398

64)Kang Ding, Zhong Shuncong. “Synthesized Correcting Method of   Phase Difference on Discrete Spectrum ”, Proceedings of Asia-Pacific   Vibration Congress (APVC), 2001:1121-1125

65)Shuncong Zhong, Jinquan Guo, Ligang Yao, and Yizhou Zhuang,   Wavelet-based Damage Localization in Plate-like Structures, The 2012 ASME   International Mechanical Engineering Congress & Exposition

66)Shuncong Zhong, Narakorn Srinil, Hossein Zanganeh and    Atilla Incecik‎, Dynamic Modelling of Offshore Wind Turbine Jackets   with Multiple Lumped Masses , OMAE2015 (accepted, 2015)

67)Jianfeng Zhong, Shuncong Zhong*, Qiukun Zhang and Ligang Yao, Two-dimensional optical coherence   tomography for low-frequency vibration measurement and response-only modal   analysis, International Conference on Structural Engineering Dynamics, Lagos,   Algarve, Protugal, 22-24 June 2015 (accepted, 2015)

68)丁康,钟舜聪,   “离散频谱的通用相位差法研究”, 电子学报, 31(1), 142-145,2003

69)丁康,朱小勇,谢明和钟舜聪, “离散频谱的综合相位差法研究”, 振动工程学报. 2002 (1): 118-122

70)丁康, 钟舜聪, “离散频谱相位差校正方法研究”, 振动与冲击, 20(2), 52-55,2001

71)陈丹阳,张秋坤,钟剑锋,郭金泉,钟舜聪*,沈耀春, 姚立纲, 基于频谱校正技术的光学相干振动和热变形层析系统研究,南京大学学报(自然科学),50(2), 1-6, 2014

72)陈宇慧,杨晓翔,钟舜聪, 对流换热对ZrO2-8%Y2O3涂层系统力学性能的影响, 航空材料学报, 05, 2014.

73)陈宇慧,杨晓翔,朱志斌,钟舜聪, 热障涂层界面形貌参数对残余应力的影响, 应用力学学报, 32(2), 175-179, 2015.

74)张涛, 钟舜聪*,沈耀春,姚立纲,基于图像压缩传感的光学单点成像系统,仪器技术与传感器01, 2015

75)涂婉丽;钟舜聪*;周卿;姚立纲, 太赫兹波在船舶防护涂层系统的传播特性研究, 系统仿真学报, 1, 2016

76)罗曼婷,游腾飞,张秋坤,钟剑锋,钟舜聪*, 基于平稳小波变换的时域光学相干层析系统, 应用光学, 36(4), 543-549,2015      

77)曹丽, 钟舜聪*, 张涛, 沈耀春, 基于图像压缩传感的自动式光学单点成像系统, 应用光学, 2015 (accepted)

78)黄跃鑫,   钟舜聪* , 伏喜斌, 黄学斌, 涂善东, 聚乙烯管道电熔接头的超声相控阵成像及缺陷特征, 焊接学报,2015 (accepted)

主要的专利:

1) 发明专利: 高温涂层结构蠕变/热变形和内部裂纹检测装置 (授权,第一发明人)

2) 发明专利:非接触结构微振动监测装置 (授权,第一发明人)

3)发明专利:珍珠真伪鉴别的无损检测系统 (授权,第一发明人)

4)发明专利:织物瑕疵光电检测装置 (授权,第一发明人)

5) 发明专利:碳纤维抽油杆的非接触损伤检测装置 (授权,第一发明人)

6) 发明专利:压电驱动器的标定装置(授权,第一发明人)

7)发明专利:可远程通讯的家用心血管检测和诊断装置(授权,第二发明人)

8) 发明专利:玻璃纤维复合材料内部结构的三维成像及损伤检测装置 (公开,第一发明人)

9) 发明专利:基于表面等离子体共振的太赫兹发射器 (公开,第一发明人)

10) 发明专利:一种生物荧光检测探头(申请,第一发明人)

11) 发明专利/PCT:高速多尺度形变和振动检测装置(申请,第一发明人)

12)发明专利:一种轴承滚子表面缺陷的激光衍射测量仪器及其方法(申请,第一发明人)

13) 发明专利/PCT:一种基于条纹靶的高速多维度振动测量装置及方法(申请,第一发明人)

14) 发明专利:光学材料折射率曲线测量方法及装置(申请,第一发明人)

15)实用新型专利:单对牙齿咀嚼压力实时检测装置(授权,第一发明人)

16) 实用新型专利:一种轴承滚子表面缺陷的激光衍射测量装置(授权,第一发明人)

获奖情况

   2011年获福建省杰出青年基金2012年获福州大学“学术新人奖”2012年获福州大学青年五四奖章2012年入选福建省引进高层次创业创新人才(福建省“百人计划”)2013年获福建省青年五四奖章(团队负责人)2014年再获福建省杰出青年基金(滚动资助计划,从过去三年90多个已经结题的福建省杰出青年基金获得者中选拔出10人冲击国家杰青)

指导硕、博士生、博士后研究方向

1)无损检测和定量评估/结构健康检测/设备状态监测/复合材料和多层薄膜结构的检测与评价

2)太赫兹光谱和成像系统及其应用、太赫兹传感

3)光学相干层析系统及其应用(医学应用和非医学应用)

4)可穿戴医疗器械、生物传感

5)信号/图像处理、器件与仪器系统

6) 大型离岸风力发电机设计和状态监测

7) 有限元分析、电磁场模拟

8) 主动振动控制/隔离

1)至8)方向适合机械电子(硕、博)、测试计量技术及仪器(硕)、机械制造及自动化(硕、博)、车辆工程专业(博)。欢迎有志之士报考硕博生/应聘博士后/年轻讲师。

福州大学机械工程学院教师钟舜聪

福大研究生导师

福州大学机械工程学院教师吴海彬

2016-11-2 20:17:38

福大研究生导师

福州大学机械工程学院教师张卫波

2016-11-2 20:18:39

搜索